Microfluidizer® pilot / production high pressure fluid processors reduce time-to-market with repeatable linear scale up from the lab, enabled by the unique fixed-geometry interaction chamber. In addition, high shear levels typically enhance process efficiency by requiring fewer passes.
- M110-EH
- M815
- M-700 Series
The M110-EH bridges the gap between R&D and production. The advantages are enhanced output (30,000 psi) and flow rates up to 450 ml/min.
- Sample Flow Rate: Up to 450 mL/min
- Processing Pressure: Up to 30,000 psi
- Guaranteed scale up to pilot plant volume
- Patented, wear resistant diamond interaction chamber (no moving parts)
- On-board heat exchanger for consistent discharge product temperature
- Ceramic (Zirconia) plunger for extended seal life
- Designed for clean-in-place with no disassembly required
- Available with clean-in-place and steam-in-place option
- Available explosion-proof option
- cGMP and cGAMP compliant
Microfluidics has introduced a machine which bridges the gap between initial pilot scale processing and production scale processing. The M815 generates up to 30,000 psi with volumes up to 1 liter per minute.
- Scale up pilot plant
- Sample Flow Rate: Up to 1 L/min
- Processing Pressure: Up to 30,000 psi
- Guaranteed scale up to pilot plant volume
- Patented, wear resistant diamond interaction chamber (no moving parts)
- On-board heat exchanger for consistent discharge product temperature
- Ceramic (Zirconia) plunger for extended seal life
- Designed for clean-in-place with no disassembly required
- Available with clean-in-place and steam-in-place option
- Available explosion-proof option
- cGMP and cGAMP compliant
Microfluidics’ production scale processors are the 700 series. Systems are optimized for specific production needs. The M-700 generates up to 30,000 psi with volumes up to 4 gallons per minute. Multiple options are available so that the system can be set to best meet both a customer’s production requirements and budget.
- Production plant scale
- M-7115, M-7125 or M-7250 models
- Electric-hydraulic system
- Sample Flow Rate: 0.25 – 4 gpm
- Up to 30,000 psi
- 15 – 50 HP power requirement
- Integration to process automation (DCS or SCADA) available
For more information click here.